Buying Guides

What Should a Wooden Hair Brush Specification Include? A Buyer's RFQ Checklist

FSC-certified wooden airbag cushion hair brush
A wooden hair brush specification should include ten fields: product format, dimensions and weight, wood species with a moisture target, finish, bristle system and grade, cushion and pin construction where fitted, logo method and placement, packaging tier, quantity per item, and destination-market notes. This guide is for importers, distributors and private label buyers preparing an RFQ: what each field should say, which fields move the quote most, and how each field becomes a check you run when the samples arrive — because a spec field you cannot verify is a field the factory is free to interpret.

Why do brush quotes come back incomparable?

Send five factories a message that says "wooden paddle brush with natural bristle, your best price" and you will receive five prices for five different products. One quotes beech, another bamboo. One quotes first-cut boar bristle, another a blend that is mostly nylon. One includes a printed box; another packs in a polybag. The quotes are not dishonest — they are answers to five different unasked questions, and the cheapest one is usually cheapest because it silently chose the cheapest interpretation of every field you left blank.
The fix costs nothing and takes an hour: a written specification. Every field you pin down removes one silent interpretation, and the quotes that come back start describing the same product — which is the only kind of quote you can compare, negotiate, or hold a factory to later. The specification is also the document your sample approval and your inspection will be judged against. Written once, it works three times.

What belongs in the specification?

Ten fields cover a wooden hair brush completely. For each: what to write, and the failure it prevents.
#
Field
What to write
The failure it prevents
1
Product format
Brush type and job: paddle detangler, oval styling brush, round brush, comb — and the hair segment it serves
A beautiful brush specced for the wrong job
2
Dimensions & weight
Overall length/width, handle length, target weight per piece
A brush that misses your shelf, carton or freight plan
3
Wood species & moisture
Species (bamboo, beech, walnut…) plus a moisture target range
Cracking and warping that appear after the container lands
4
Finish
Raw, oiled, waxed or lacquered; matte or gloss; colour if painted
Finish peeling, colour drift between batches
5
Bristle system & grade
Boar (soft / medium / hard grade), nylon pins, or a named blend — never just "natural"
Whatever stock the factory reaches for first
6
Cushion & pin construction
For pin brushes: cushion softness, pin material, pin tip finish
Scratchy pin tips and cushions that collapse in a season
7
Logo
Method (laser engraving / heat transfer / printing / water transfer), placement, artwork size — working area is about 3–4 cm, or Ø4.2 cm for round marks
An illegible mark discovered at production scale
8
Packaging
Tier (sleeve / single box / set box / gift box), barcode and copy requirements
Freight surprises and chain rejections on packaging compliance
9
Quantity per item
Pieces per SKU against the 1,200-piece MOQ per item
A "great price" that assumed five times your quantity
10
Destination market
Country/region and channel (retail chain, DTC, salon)
Compliance and labelling gaps found at the border
Two fields deserve emphasis because buyers most often leave them blank. The moisture target (field 3) is the single highest-value line in the document: a species name alone does not protect you, because cracking follows drying, not species. And the bristle grade (field 5) decides how the brush feels — the quality your customer actually reviews. Our boar bristle wholesale guide sets out the soft, medium and hard grades distributors buy against; name one in your spec.


A specification is the brush, written down: format, species and moisture, bristle grade, logo area, packaging. If a field is missing, the factory chooses it for you.

Which fields move the quote most?

When two quotes for the same spec still differ, the difference is hiding in four fields — check these first before concluding anything about a factory's pricing.
Bristle system and grade. This is usually the largest single cost swing in a wooden brush. First-cut boar bristle, bleached boar and nylon pins are different materials at different prices, and a blend ratio moves the number again. It is also the field where silent substitution is easiest — which is why the grade must be named, and why the approved sample's feel becomes your reference.
Wood species. Bamboo, beech and walnut sit at different material costs and machine differently. Our materials guide for brands compares the three in depth; for the spec, the point is simpler: a quote without a species is a quote for the cheapest species.
Finish steps. Each added step — colour, multi-coat lacquer, hand finishing — is labour on every piece. A painted line is not a natural line with colour added; it is a different cost structure and a different QC burden (colour consistency across batches).
Packaging tier. The box can cost more than the difference between two wood species. Spec the tier in the RFQ (field 8), or every factory will quote its own default and you will compare boxes while thinking you are comparing brushes.

How does the spec become your sample acceptance check?

A specification earns its keep at sampling. Read down your own document and convert each field into a check with a pass mark — that sheet, signed off against the physical samples, is your golden sample record, and it is what production gets held to.
Spec field
Sample-stage check
Pass mark
Moisture target
Pin-meter reading on the handle's end grain, every sample piece
Readings inside the specified band and consistent piece to piece
Bristle grade
Hand and hair test against the named grade; ask the factory to name the grade in writing
The grade in the sample is the grade in the document
Tuft / pin anchoring
Steady hand pull on central tufts; pin-tip run across the palm
No tuft releases as a unit; no scratch from pin tips
Logo
Measure the mark; read it at arm's length in daylight
Within the specified area (about 3–4 cm / Ø4.2 cm) and legible at real size
Finish
Five soak-and-dry cycles on one sample; inspect for whitening, lifting, hairline cracks
No finish failure, no cracks, no loosened tufts
Dimensions & packaging
Measure and weigh the packed sample unit
Matches the figures your freight plan is built on
What this looks like on our line. Our handles are kiln-dried to 8–12% moisture and re-measured after shaping and again before packing; blanks outside the band are pulled, not blended in. Every batch passes bristle pull-force and drop testing before it leaves. When your spec names the same checks, our sampling simply runs your document: standard samples in 5–7 working days, new designs in 8–15, with a free digital logo preview before any physical sample is made.
Our claim, stated plainly: No wooden brush handle should leave a factory above 12% moisture content. We kiln-dry every handle to 8–12%, re-measure after shaping and before packing, and pull any blank that reads outside the band. If your specification does not carry a moisture number, you have not specified the thing that decides whether the brush cracks.
Our claim, stated plainly: A field that is not in the specification is not in the contract. We quote against written specs and hold production to the approved sample — so write the fields you actually care about, and we will sign against every one of them.

What should you leave out of a specification?

Tolerances you cannot measure. A ±0.1 mm tolerance on a wooden handle is theatre: wood moves with humidity, and you have no instrument on your bench that adjudicates it. Write tolerances you can check with a calliper, a scale and a moisture meter — those are enforceable. The rest invites disputes nobody can settle.
Claims disguised as specs. "Detoxifying brush" in a product description field imports a regulatory problem into a manufacturing document. In the EU, cosmetic claims must meet the common criteria in Regulation (EU) No 655/2013; keep the spec to physical construction and let your marketing team fight the claims battle separately, with copy that describes what the brush physically does.
Certificate requests in place of batch documents. Asking for "certificates" generically gets you a folder of PDFs of varying age and scope. Ask instead for documents matched to your product and batch — and for material claims such as FSC, the claim attaches to the material actually supplied for your order. Our manufacturer selection checklist covers the paperwork questions to ask before you ever reach the RFQ stage.

What does it take to order?

Send the specification — or send a photo and a rough idea and we will draft the spec with you. Either way we reply within 24 hours with a detailed quote against named fields, so the number you receive is a number you can compare. The MOQ is 1,200 pieces per item; production runs across three lines in Ningbo at around 30,000 pieces a week, and mass production runs 30–40 days for MOQ orders. Physical samples are paid — the fee covers materials, production and shipping and is credited against your bulk order — and the full sequence is laid out on our How We Work page.
Send your specification or a photo and the first thing you will get back is a quote with nothing left to silent interpretation.

Frequently asked questions

Can I send a photo instead of a written specification?

Yes — a photo or a rough idea is enough to start. We match the model and materials, draft the specification fields with you, and quote against the written version before sampling. The photo starts the conversation; the written spec is what makes the quote comparable and the sample approvable, so we always land on the document before production.

What moisture content should I specify for a wooden hair brush?

Specify 8–12%, measured on the finished handle. Above that band, wood keeps moving in dry, heated indoor markets and cracks follow; below it, you pay for drying time that adds brittleness without adding life. Write the band into the spec, ask for re-measurement after shaping and before packing, and spot-check sample handles with a pin moisture meter.

How detailed should the tolerances in my spec be?

As detailed as your bench can verify. Dimensions, weight, logo size and moisture all have cheap instruments — calliper, scale, moisture meter — so tolerances on those fields are enforceable. Tolerances finer than your instruments, or on properties wood cannot hold across humidity changes, create disputes nobody can settle. Spec what you can check; check what you specced.

Does a detailed specification change the MOQ or the sample timeline?

No. The MOQ is 1,200 pieces per item and the sampling clock is the same — 5–7 working days for standard samples once details are confirmed and the sample fee is received, 8–15 for new designs. A complete spec usually shortens the total cycle, because the first samples arrive right instead of starting a correction round.

What if I don't know which bristle grade my line needs?

Ask for the same handle sampled in two grades — the firmness you think you want and one step softer — and test both with people who match your buyers. Then name the winning grade in the specification. A grade the factory cannot name cannot be reproduced in batch ten, so the naming matters as much as the choice.
Custom logo laser engraving

Work with Beautipak

Ready to build your brush line?

Send your requirements and our team will reply with a quotation and a sampling plan.

Get a quote